Table of Contents
Advertisement
1 display bumpers (3)
5 M2 x 3-mm screws (8) for
15-inch display
2 M2.5 x 5-mm screws (5) 6 top cover
3 display bezel
7 display-feed flex cable
4 15" display panel
8 screw covers (2)
Display Bezel
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
hinge
cover.
3. Remove the keyboard.
4. Remove the
display
assembly.
5. Use a plastic scribe to pry the five screw covers out of the screw holes located on the front of the bezel.
6. Remove the five M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
7. Starting at the bottom of the display panel, use your fingers to separate the bezel from the top cover and lift the inside edge of the bezel away from the
top cover.
Display Panel
Computer."
Advertisement
Table of Contents
