Maintenance; Engine Emissions Information; 10-Hour Inspection - Evinrude FPL115 Operator's Manual

Maintenance, replacement, or repair of the
emission control devices and systems may be
performed by any marine SI (spark ignition) en-
gine repair establishments or individual.

ENGINE EMISSIONS INFORMATION

Manufacturer's Responsibility
Beginning with 1999 model year engines, manufac-
turers of marine engines must determine the ex-
haust emission levels for each engine horsepower
family and certify these engines with the United
States of America Environmental Protection Agen-
cy (EPA). An emissions control information label,
showing emission levels and engine specifications,
must be placed on each engine at the time of man-
ufacture.
Dealer's Responsibility
When performing service on all 1999 and more re-
cent Evinrude outboards that carry an emissions
control information label, adjustments must be kept
within published factory specifications.
Replacement or repair of any emission related
component must be executed in a manner that
maintains emission levels within the prescribed cer-
tification standards.
Dealers are not to modify the engine in any manner
that would alter the horsepower or allow emission
levels to exceed their predetermined factory speci-
fications.
Exceptions include manufacturer's
changes, such as altitude adjustments, for exam-
ple.
Owner Responsibility
The owner/operator is required to have engine
maintenance performed to maintain emission levels
within prescribed certification standards.
The owner/operator is not to, and should not allow
anyone to, modify the engine in any manner that
would alter the horsepower or allow emissions lev-
els to exceed their predetermined factory specifica-
tions.
Tampering with the fuel system to change horse-
power or modify emission levels beyond factory
settings or specifications will void the product war-
ranty.

MAINTENANCE

EPA Emission Regulations
All new 1999 and more recent Evinrude outboards
manufactured by BRP are certified to the EPA as
conforming to the requirements of the regulations
for the control of air pollution from new watercraft
marine spark ignition engines. This certification is
contingent on certain adjustments being set to fac-
tory standards. For this reason, the factory proce-
dure for servicing the product must be strictly
followed and, whenever practicable, returned to the
original intent of the design. The responsibilities list-
ed above are general and in no way a complete list-
ing of the rules and regulations pertaining to the
EPA requirements on exhaust emissions for marine
products. For more detailed information on this sub-
ject, you may contact the following locations:
VIA U.S. POSTAL SERVICE:
Office of Mobile Sources
Engine Programs and Compliance
Division
Engine Compliance Programs
Group (6403J)
401 M St. NW
Washington, DC 20460
VIA EXPRESS or COURIER MAIL:
Office of Mobile Sources
Engine Programs and Compliance
Division
Engine Compliance Programs
prescribed
Group (6403J)
501 3 rd St. NW
Washington, DC 20001
EPA INTERNET WEB SITE:
www.epa.gov

10-HOUR INSPECTION

After 10 hours of operation, your new engine will be
broken in and its mechanical parts will have seated.
At that time all systems should be checked and any
adjustments needed should be made.
Your Dealer will perform this 10-hour Inspection at
your request and expense (based on local rates),
according to what your engine needs — refer to En-
gine Maintenance and Inspection Schedule, 10-
Hour Inspection for a partial list.
Follow consistent preventive maintenance by hav-
ing your Dealer check and service your engine
once a year or after each 100 hours of operation,
whichever comes first.
37
Maintenance -