Options And Accessories; Remote Controls - Miller GOLDSTAR 302 Owner's Manual

OPTIONS AND ACCESSORIES

A variety of optional controls and accessories allow you to tailor your Gold Star welder to meet your specific needs. All
are specifically designed to be used with Gold Star Series power sources, so you never have to worry about
compatibility.
REMOTE ON/OFF CONTROL
(#042 869)
Allows you to turn your Gold Star
on or off from a distance of 20 ft.
(6 m). This is especially useful if
your power source is located up in
a mezzanine. Connects to the
power source's terminal strip.
DIGITAL METERS
(#042 967 Field) Gold Star 302
(#043 107 Field) Gold Star 452
(#043 108 Field) Gold Star 652
Easy to install, front panel mount,
digital amp and volt meters.
STANDARD RUNNING GEAR
(#042 886)
The large 10 in. (254 mm) rear
wheels and 5 in. (127 mm) front
casters on this running gear
provide excellent mobility on the
shop floor, making it easier to
move the power source around
and over cables and cracks. Very
easy to install. Handles double as
weld cable holder.
ROUGH TERRAIN RUNNING GEAR
(#043 043)
This two-wheel running gear
features pneumatic tires for extra
mobility. Handles double as a
cable holder.
INTERNATIONAL CABLE ADAPTER
(#168 077) Female 1 Qty.
Dinse brand insulated female twist
lock connector installs on output
stud, providing quick disconnect of
secondary weld cables.
(#042 418) Male 1 Qty.
Cable mounted Dinse brand
insulated male twist lock connector
accepts #1 or #2 AWG cable sizes.
ENVIRONMENTAL
PROTECTION PACKAGE
(#043 049 Factory)
Internal machine components are
sprayed with a protective
polyurethane coating.
CYLINDER RACK/LIFT
(#043 005)
Miller's patent pending cylinder
rack features a lift which moves
the cylinders up onto the rack and
into position without manual
lifting! The rack accommodates
two cylinder bottles, and can be
attached directly to the running
gear.
STANDARD CYLINDER RACK
(#042 887)
Installs on standard running gear.
WELD CABLE HOLDER
(#043 055 Field)
Attaches to front of power source,
allowing weld cables to be stored
near the control panel.
AIR FILTER KIT
(#042 939 Field)
Protect your Gold Star from dusty,
dirty environments with this
reusable air filter that easily
attaches and detaches from the
front of the power source.
GROUND CURRENT SENSOR
(#042 983 Factory)
(#043 146 Field)
Disables power source if weld
current is present on primary
ground.
WATER COOLANT
SYSTEMS
WATERMATE 1A
(#042 495) 115 VAC
For use with water-cooled torches
rated up to 500 Amps. Vertical
design conveniently mounts to
Miller cylinder rack in place of one
cylinder. For more information, see
the Miller Coolant Systems
literature sheet, Index No. AY/7.2.
COOLMATE 4
(#042 288)
For use with water-cooled torches
rated up to 600 Amps. Tough
molded polyethylene case with
carrying handle. For more
information, see the Miller Coolant
Systems literature sheet, Index
No. AY/7.2.
RADIATOR 1A
(#042 492) 115 VAC
RADIATOR 2A
(#042 493) 230 VAC
For use with water-cooled torches
rated up to 500 Amps. For more
information, see the Miller Coolant
Systems literature sheet, Index
No. AY/7.2.
HF-251D-1 HIGH-FREQUENCY
ARC STARTER/STABILIZER
(#042 388)
This portable 250 Amp, 60% duty
cycle unit adds high frequency to
the welding circuit to help start the
arc when using the GTAW (TIG)
process. Operates on 115 VAC
50/60/100 Hz. For more
information, see the literature
sheet, Index No. AY 5.1.

REMOTE CONTROLS

AND SWITCHES
(#129 337)
Momentary- and
maintained-contact rocker switch
for contactor control. Push forward
for maintained contact and back
for momentary contact. Includes
20 ft. (6 m) cord and 14-pin plug.
(#151 086)
Rotary motion fingertip control.
Fastens to TIG torch using two
Velcro strips. Allows complete
current and contactor control at
operator's fingertips. Includes 28
ft. (8.5 m) cord and plug.
1/95