Miller GOLDSTAR 302 Owner's Manual page 30

OPTIONS AND ACCESSORIES
RHC-14 HAND CONTROL
(#129 340)
Miniature hand control for remote
current and contactor control.
Dimensions: 4 in. (102 mm) x 4 in.
(102 mm) x 3-1/4 in. (82 mm).
Includes 20 ft. (6 m) cord and
14-pin plug.
RFC-14 FOOT CONTROL
(#129 339)
Heavy duty foot current and
contactor control. Includes 20 ft. (6
m) cord and 14-pin plug.
EXTENSION CABLES FOR
14-PIN
PLUGS TO 14-PIN SOCKETS
(#122 972) 10 ft. (3 m)
(#122 973) 25 ft. (7.6 m)
(#122 974) 50 ft. (15.2 m)
(#122 975) 75 ft. (22.8 m)
This extension cord makes a direct
connection between the power
source and the accessory control.
No messy splicing or adapting
required.
GMAW/FCAW WELDING
S-32S PORTABLE WIRE
FEEDER
(#088 816)
For .035 - 5/64 in. (0.6 - 2.0 mm)
flux-cored wire. See literature,
Index No. M/6.21.
SUPER S-32P SERIES
COMPACT, PORTABLE WIRE
FEEDER
(#159 928)
For .035 - 5/64 in. (0.6 - 2.0 mm)
flux-cored wire. See literature,
Index No. M/6.26.
1/95