Advertisement
Keep hands away from the rotating grinding wheels
Wear protective gloves and use safety glasses.
The noise level when working can exceed 85 dB(A); wear ear protection
Anyone entering the work area must wear personal protective equipment (fragments of the work
piece or of a broken accessory may fl y away and cause injury beyond the immediate area of
operation).
•
Never grind side wards against the rotating grinding wheel; only grind at the front.
•
Do not brake the grinding wheels with side pressure.
•
Allow the tool to cool down after a continuous use of 30 minutes.
•
If the cord is damaged or cut through while working, do not touch the cord, but immediately
disconnect the plug.
•
Never use the tool when cord is damaged; have it replaced by a qualified person.
•
Inspect the extension cord periodically and replace it, if damaged.
•
Always disconnect plug from power source before making any adjustment or changing any
accessory.
Never cut magnesium high danger to fire!
- Do not use the power tool if the ON/OFF switch does not turn the power tool ON and OFF.
Make all machine adjustments or maintenance with the machine unplugged from the power
source.
ASSEMBLY
If you notice any transport damage while unpacking, notify your supplier immediately. Do not operate
the machine!
Dispose of the packing in an environmentally friendly manner.
Clean all rust protected surfaces with a mild solvent.
Mount the tool rests:
There is a left and a right tool rest, ensure that you install them correctly.
Use the bolt, washer, spring washer (B) and mount the tool rest (C) to the wheel housing (D).
Adjust the tool rest to within < 2mm of the grinding wheel.
As the wheel wears down, the tool rest must be re-adjusted.
Mounting the spark protection guards and eye protection shields:
Use a bolt and washer to mount the eye protection shield and spark protection guard.
6
Advertisement
