Advertisement
TROUBLE SHOOTING
Motor doesn't start
*No electricity – check mains and fuse.
*Defective switch, motor or cord – consult an electrician.
Machine vibrates excessively
*Stand on uneven surface – adjust base for even support.
*abrasive wheel damaged – replace abrasive wheel immediately
Grinding surfaces is bad
*Worn abrasive wheel
*Work piece not suitable for machining
*Feed pressure too high – Do not force the machine.
ENVIRONMENT
INFORMATION FOR USERS
In accordance with the implementation of Directives 2002/95/EEC, 2002/96/EEC and 2003/108/EEC,
relative to reducing the use of hazardous substances in electric and electronic appliances and the
disposal of waste, please take note of the following:
The crossed out wheelie bin symbol found on the appliance or the packaging indicates that the
product must be disposed separately from ordinary household waste when it reaches the end of
its working life.
The user must consign the unwanted appliance to an authorized waste disposal centre for
electric and electronic goods, or alternatively, hand it over to the relative dealer at the moment
of purchasing a new appliance of the same type on a basis of a one to one ratio.
Differentiated disposal to enable possible recycling or environmentally compatible elimination of
the appliance helps to limit undesirable effects on health and environment and promotes the
reuse and/or recycling of the materials that compose the appliance.
This symbol will remind you of this when the need for disposing occurs.
11
Advertisement
