Advertisement
:
CAUTION
Read and follow all Safety Rules and Operating Instructions before First Use of
this Product.
This manual provides important information on proper operation and maintenance. Every effort has
been made to ensure the accuracy of this manual. We reserve the right to change this product at any
time without prior notice.
SAFETY RULES
WHEN USING ELECTRIC TOOLS. ALL THE SAFETY INSTRUCTIONS SHOULD ALWAYS BE
OBSERVED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY.
BEFORE ATTEMPTING TO OPERATE THE TOOL PLEASE READ ALL THE INSTRUCTIONS AND
SAVE IT FOR FURTHER REFERENCE
BASIC SAFETY PRECAUTIONS FOR ALL ELECTRIC TOOLS
(1) Keep work area clear
- Cluttered area and benches invite injuries.
(2) Consider work area environment
- Don't expose electric tools to rain.
- Do not use electric tools in damp or wet locations.
- Keep work area well lit.
- In particular, no inflammable liquids or gases must be present.
(3) Avoid electric shock
- When you are operating tool, do not touch metal being grounded such as pipe, radiator, freezer etc.
(4) Keep children and visitors away
- Don't let children contact tool or extension cord. All visitors should be kept away from work place.
(5) Store idle tools
- When not in use, tools should be stored in try, high, or locked-up place.
(6) Don't force the tool
- It will do the job better and safer at the rate it is intended. Avoid unnecessary overload, which may
put the operator at risk and impair function of the tool.
(7) Use the right tool
- Don't force small tools and attachment to do the job of a heavy-duty tool.
(8) Dress properly
- Don't wear loose clothes or jewelry; they can be caught in moving parts.
- Rubber gloves and non-skid footwear are recommended when working outdoors.
- Wear protective hair covering to contain long hair.
(9) Use safety goggles
- Always wear safety goggles. If dust is produced, use the special masks.
(10) Don't abuse cables
- Never carry tool by cable or rank it to disconnect it from socket. Keep cable from heat, oil and sharp
edges.
(11) Don't overreach
- Keep proper footing and balance at all times.
(12) Maintain tools with care
- Keep tools sharp and clean for better and safer performance. Follow instruction for lubricating
accessories inspect tool cords periodically and replace if damaged.
- Keep handles dry, clean and free from oil grease.
4
Advertisement
