Page 3
Starting- Machine operation Startup and adjustments Maintenance and inspection Trouble shooting SPECIFICATIONS Model No. PX-150HDBG / PX-150BG Motor 230V~50Hz – 0,52kW / 0,25kW 2950 min - No load speed ø 150 x 25 x 32,0 mm / Grinding wheel dimension ø...
Page 4
CAUTION Read and follow all Safety Rules and Operating Instructions before First Use of this Product. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice.
Page 5
(13) Disconnect tools - When not in use, before servicing and when changing accessories such as wheels, bits and cutters, disconnect tools from the power supply. (14) Remove adjusting keys and wrenches - Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
Page 6
Keep hands away from the rotating grinding wheels Wear protective gloves and use safety glasses. The noise level when working can exceed 85 dB(A); wear ear protection Anyone entering the work area must wear personal protective equipment (fragments of the work piece or of a broken accessory may fl y away and cause injury beyond the immediate area of operation).
Page 7
Adjust the spark protection guard to within < 2mm of the grinding wheel. As the wheel wears down, the spark guard must be re-adjusted. Mount the bench grinder: To prevent the grinder from moving during operation, it must be securely mounted to a work bench or stand.
Page 8
- Grounding plug should be plugged directly into a properly installed and grounded 2- prong grounding- type receptacle, as shown. - Do not remove or alter grounding prong in any manner. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electrical shock. STARTING OPERATION You can start the machine with the green ON-button.
Page 9
SETUP AND ADJUSTMENTS Changing the abrasive wheel The abrasive wheel may only be changed when the mains plug is pulled! The abrasive wheel has to meet the technical specification. Use only abrasive wheels rated at 3000 min - or higher. Check abrasive wheel for flaws (cracks) before installation.
Page 10
Adjusting the tool rest As the wheel wears down, the tool rest must be re-adjusted to maintain a maximum 2mm clearance. Loosen screws (A) to adjust. MAINTENANCE AND INSPECTION Make all machine adjustments or maintenance with the machine unplugged from the power source.
Page 11
TROUBLE SHOOTING Motor doesn’t start *No electricity – check mains and fuse. *Defective switch, motor or cord – consult an electrician. Machine vibrates excessively *Stand on uneven surface – adjust base for even support. *abrasive wheel damaged – replace abrasive wheel immediately Grinding surfaces is bad *Worn abrasive wheel *Work piece not suitable for machining...