Advertisement
(13) Disconnect tools
- When not in use, before servicing and when changing accessories such as wheels, bits and cutters,
disconnect tools from the power supply.
(14) Remove adjusting keys and wrenches
- Form the habit of checking to see that keys and adjusting wrenches are removed from the tool
before turning it on.
(15) Avoid unintentional starting
- Don't carry plugged-in tool with finger on switch. Make sure the switch is "off" when connecting the
plug to the socket.
(16) Use extension cord
- If an extension cord is required, always check that its cross-section measurement is equal to or
greater than that of the tool capability and so marked.
(17) Stay alert
- Watch what you are doing, use common sense and do not operate the tool when you are tired.
(18) Check damaged parts
- Before further use of tool, a guard or other part that is damaged should be carefully checked to
determine that it will operate properly and perform it's intended function.
- Check for alignment of moving parts, binding of moving parts, mounting and any other conditions
that may affect its operation.
- A guard or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in this instruction manual.
- Have defective switches replaced by a qualified service center.
- Do not use the tool if the switch does not turn it on and off.
(19) Check the voltage
- Don't plug the electric tool into the mains until you have checked that the voltage shown on the data
plate corresponds to the voltage available.
(20) Replace parts
- The use of improper accessory or attachment other than recommended present a risk of personal
injuries.
(21) Have your tool repaired by an expert
- This electric tool complies with the relevant safety rules. Repairs should only be carried out by
qualified persons using original spare parts; otherwise this may result in considerable danger to the
user.
SPECIFIC SAFETY INSTRUCTIONS FOR BENCHGRINDERS
This tool should not be used by people under the age of 16 years.
Do not use damaged, deformed or vibrating grinding wheels.
Use only grinding wheels with an allowable speed matching at least the highest no-load speed of
the tool.
Before use, check that the grinding wheels are free of damage, properly mounted, and able to
rotate freely.
Always mount spark protection guard and tool rest ; never use the tool without them.
Do not work materials containing asbestos (asbestos is considered carcinogenic).
Secure the work piece (a work piece clamped with clamping devices or in a vice is held more
securely than by hand).
Only use the flanges which are supplied with this tool.
When grinding metal, sparks are generated; keep other persons and combustible material from
work area.
5
Advertisement
