Electro-Voice ZLX-12P-UX User Manual page 18

ZLX Series
BASS Menu
The Bass menu is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a parametric EQ filter
that is centered on 60 Hz.
The default is zero (0).
LED Menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON, OFF or LIMIT.
▪
▪
▪
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for two (2) minutes.
Available options for this selection are: ON or OFF.
The default is ON.
CONTRAST Menu
The Contrast menu is used to determine the contrast on the LCD.
The range is -10 dB to +10 db.
The default is zero (0).
STORE Menu
The Store menu allows you create up to five (5) customized user settings. Available options
for this selection are: EXIT, 1, 2, 3, 4, and 5.
Notice!
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0-9.
The name field length is 12 characters.
To store customized user settings, do the following:
1.
2.
3.
4.
2015.12 | 02 | F.01U.319.253
ON – turns the LED on when the power to the loudspeaker is ON. (Default)
OFF – turns the LED off.
LIMIT – turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
From the DSP menu, scroll to STORE.
Push the MASTER VOL knob to select STORE.
The store screen appears.
Push the MASTER VOL knob to select 1.
The Enter name for 1 screen appears.
Use the MASTER VOL knob to scroll through the characters.
The characters appear.
User Manual Electro-Voice