Table of Contents
Advertisement
OPERATION
Lighting instructions
1.
Press and hold electronic igniter button.
2. Turn the burner control to the high position, press and hold. When the
burner lights, release the electronic igniter button.
3.
Continue to depress the burner control knob for 30 seconds and then
release. If the flame goes out, repeat the procedure.
4.
Adjust the flame to the desired height with the burner control knob.
5.
If the burner will not light with the electronic igniter, hold a lit long match
or lit long butane lighter to the ignition area of the burner and continue
with step 2.
6.
To shut down the burner turn the burner control knob clockwise to the off
position. Then turn the gas off at the source (propane cylinder valve).
Page 12 of 16
Hide quick links:
Advertisement
Table of Contents
