Power Button Assembly - Dell Latitude D420 Service Manual

Back to Contents Page
Power Button Assembly
Dell™ Latitude™ D420 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts.
1. Follow the instructions in Before You
2. Remove any installed PC Cards from the PC Card slot.
3. Remove any installed memory modules or Mini PCI cards (see
4. Remove the hard drive (see
5. Remove the hinge cover (see
6. Remove the keyboard (see Keyboard).
7. Remove the internal card with Bluetooth® wireless technology (see
8. Remove the display assembly (see
9. Remove the palm rest (see
10. Disconnect the power-button assembly connector from the system board.
11. Push the assembly toward the inside of the computer base and lift out.
1

power button assembly

Back to Contents Page
Begin.
Hard Drive).
Hinge Cover).
Display Assembly).
Palm Rest).
2 computer base
Memory and Mini-Cards).
Internal Card With Bluetooth® Wireless Technology).