Xerox Phaser 5335 Printing Manual page 87

NOTE: The part of data that falls outside the printable area will not be printed even if you
adjust the position of the printable area. Also, the part of data that falls outside the printable
area due to the adjustment of the printable area will not be printed.
Holding down the < > or < > button scrolls through the options in a circular fashion.
Simultaneously pressing the < > and < > buttons displays the default value.
Ruled Line
Sets the method for printing double-byte ruled lines.
The following options are available:
[Image] (default)
Prints double-byte ruled lines as images. This eliminates misalignment between
ruled lines and images.
[Font]
Prints double-byte ruled lines using built-in fonts. This gives a uniform appearance
to ruled lines and texts.
Print Control
Skip Blank Pages
Sets whether or not to skip blank pages during printing.
The following options are available:
[On] (default)
Skips blank pages.
[Off]
Does not skip blank pages.
NOTE: Pages that only contain white images or spaces entered with external characters
will be printed as blank pages even when [Skip Blank Pages] is set to [On].
When [On] is selected, and if [2 Sided Print] or [2 Pages Up] is enabled, blank pages will
be skipped during printing.
Image Enhance
Image Enhance is a feature that artificially enhances resolution by smoothing out
transitions between black and white and reducing jagged appearance. Set whether
or not to enable Image Enhance by selecting [On] (default) or [Off].
Character Range
Sets whether or not to extend the position of the right margin.
The following options are available:
[Normal] (default)
Sets the right margin at column 136 at 10 cpi.
[Extended]
Depending on the zoom ratio setting, this extends the position of the right margin
when there is enough space to the right of column 136 at 10 cpi and prints also in
that extended area.
Setting the ESC/P Mode
75