Xerox Phaser 5335 Printing Manual page 84

NOTE: When [Zoom Mode] is set to [Fixed %] or [Whole Output Size], the printer
automatically determines the zoom ratio based on the [Document Size] and [Output Size]
settings.
When [2 Pages Up] is enabled, the zoom ratio will be 1/2 of the zoom ratio determined
from [Document Size] and [Output Size].
[Output Size] cannot be set when [Paper Tray] is set to [Tray 1], [Tray 2], [Tray 3], or [Tray
4]. In such case, [Output Size] displays the paper size set for the selected paper tray.
Document Size
Sets the size and orientation of the document to be printed.
The following options are available:
[Portrait] (default)
[Landscape]
[A4 Portrait], [A4 Landscape], [A3 Portrait], [A3 Landscape], [A5 Portrait], [A5
Landscape], [B4 Portrait], [B4 Landscape], [B5 Portrait], [B5 Landscape],
[100 x 148mm P], [100 x 148mm L]
[11x17 Portrait], [11x17 Landscape]
[8.5x14 Portrait], [8.5x14 Landscape]
[8.5x13 Portrait], [8.5x13 Landscape]
[8.5x11 Portrait], [8.5x11 Landscape]
[R15x12 Landscape] (continuous form paper: 15 x 12; 136 columns/72 rows)
[R15x11 Landscape] (continuous form paper: 15 x 11; 136 columns/66 rows)
[R10x12 Portrait] (continuous form paper: 10 x 12; 80 columns/72 rows)
[R10x11 Portrait] (continuous form paper: 10 x 11; 80 columns/66 rows)
NOTE: When [Zoom Mode] is set to [Fixed %] or [Whole Output Size], the printer
automatically determines the zoom ratio based on the [Document Size] and [Output Size]
settings.
When [2 Pages Up] is enabled, the zoom ratio will be 1/2 of the zoom ratio determined
from [Document Size] and [Output Size].
The paper orientation you select here is that of the document to be printed. The orientation
will not affect the orientation of the paper in the selected paper tray.
When [Portrait] or [Landscape] is selected, [Document Size] will be the size selected for
[Output Size].
Quantity
Sets the number of copies to be printed within the range of 1 (default) to 250.
72
Setting the ESC/P Mode