Advertisement
Setting Date and Time
1. Press MODE/ON to turn the unit on.
2. Continue pressing MODE/ON or rotate the RS until
the time and date are displayed.
3. Press
to scroll through the list of available
/
cities.
4. When the city you want is displayed, press ENTER to
select it as your Home City.
5. Press and hold ESC for two seconds until the year
field blinks.
6. Rotate the RS to change the year.
7. Use
to move to the month, day, hour and
/
minute fields.
8. Rotate the RS to change the number in each field.
9. Press ENTER to confirm the date and time changes.
To exit without saving your changes, press MODE/ON.
Changing the Settings
1. Press MODE/ON to turn the unit on.
2. Continue pressing MODE/ON or rotate the RS until
the Setup screen is displayed.
3. Press ENTER.
4. Press
/
to cycle between Language,
Contrast, and Volume and press ENTER to select
the one you want.
Language enables you to select English, Français,
Deutsche, Italiano or Español as the message lan-
guage. The message language is the language of
the menu prompts and screen messages. This
becomes your default lookup language until you
change it.
Note: All translations are made from a lookup lan-
guage to a target language. You can set both at the
"WORD" or "PHRASE" screens.
Contrast enables you to set how light or dark the
screen is.
Volume enables you to select low or high as the vol-
ume of the spoken phrases.
5. Press
/
or rotate the RS to scroll to the set-
ting you want.
6. Press ENTER to confirm the settings.
Note: There is no OFF key. The unit turns itself off when
there is no activity for approximately three minutes.
Using the Translator
1. Press MODE/ON to turn the unit on.
2. Continue pressing MODE/ON until "WORD" or
"PHRASE" is displayed.
3. Press
/
to cycle through the lookup/target
languages. Stop when you see the ones you want.
4. To start searching for a word or a phrase in the lookup
language, press ENTER or the RS.
The letter A is displayed for words and the first catego-
ry is displayed for phrases.
5. Rotate the RS to scroll through the letters or cate-
gories and press ENTER or the RS to select the one
you want.
6. Repeat the above step for a second letter.
The first word starting with the letters you entered is
displayed.
7. Repeat Step 5 for a sub-category of phrases.
8. Rotate the RS to scroll through the list of matching
words or list of phrases.
9. Press ENTER to see the translation of a phrase in the
target language.
The translation of a word appears on the same screen
as the word.
indicates the word on the screen is
included in one or more phrases.
Press ENTER to see the phrase in the lookup lan-
guage. Press ENTER again to see the translation in the
target language.
indicates speech data is available.
Press TALK to hear the phrase.
To save the word or phrase on the screen to user memory,
press and hold ESC for about 3 seconds. To view the
words in user memory, press MODE/ON until you see
"WORD" or "PHRASE", and press ENTER. Rotate the RS
until you see "User Memory" and press ENTER. Then
rotate the RS to see your list of words or phrases. To
delete a saved word or phrase, press and hold ESC for
about 3 seconds when it is on the screen.
Advertisement
