Q-06: What Happens If I Use Batteries Other Than Saft"S Lsh20 (3.6V); Can Ax-Tfrs Operate With One Battery For Each Tx (Transmitter) And Rx (Receiver); Q-08: How Long Do Lsh20 Batteries Last; Q-09: What Affect The Battery Life Of Ax-Tfrs - Optex AX-100TFR Series Frequently Asked Questions Manual

Battery operated photoelectric detectors
Table of Contents

Advertisement

AX-100/200TFR series
Frequently Asked Questions (FAQ's)
Q-06: What happens if I use batteries other than SAFT's LSH20 (3.6VDC)?
A-06: Usage of batteries other than LSH20 may result in followings.
Shorter or unstable operation time
Permanent damages to the AX-TFRs
Causing fire and/or emissions of toxic gas.
Q-07: Can AX-TFRs operate with one battery for each TX (transmitter) and
RX (receiver)?
A-07: Yes, It is possible that AX-TFRs operate with one LSH20 for each TX
and RX. Please also be aware that using one LSH20 will reduce the expected
operation period and make AX-TFRs more vulnerable to shocks and
vibrations.

Q-08: How long do LSH20 batteries last?

A-08: Under ordinary conditions LSH20 batteries last at least 3 years.
For AX-100TFR (30m): Approx. 5 years
For AX-200TFR (60m): Approx. 3 years
* Use four LSH20 batteries manufactured by SAFT (not included)
* Battery life is stated for a condition that it is used within the ambient
temperature range of 20 to 25 degree Celsius.
* Battery life of AX-200TFR Transmitter (TX) is approximately 3 years
whereas Receiver has approx. 5 years of life.

Q-09: What affect the battery life of AX-TFRs?

A-09: Colder climate may shorten the operation period. Since AX-TFRs do
not share power supply with wireless transmitters, expected life period will
not be affected by frequency of alarms.

Q-10: What happens if I accidentally insert batteries upside down?

A-10: Battery box (Back box) will not turn on electricity with LSH20 batteries
upside down. AX-TFRs will neither be operating nor be affected.

Q-11: At what power voltage, Low battery signal is turned on?

A-11: Low Battery Indicator and Output will be turned on at 3.0VDC.
Important note:
> Please remove all batteries prior to replacing with new ones. If this is not
done, the low battery indication LED will not reset and continues to flicker.
P.5
All rights reserved by OPTEX Co., Ltd.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax-200tfr series

Table of Contents