Tri-Mode Six Channel Configuration
Lowest recommended impedance is 2W stereo and 4W bridged mono.
●
Front and rear outputs must be set for full range operation.
●
Passive crossovers must be used on all components and frequencies must not overlap.
●
WARNING!
Failure to observe these requirements may result in damage to the amplifier.
+
1CH
1CH
18
SPEAKER
BRIDGE
-
+
-
2CH
2CH
SPEAKER
BRIDGE
+
-
+
3CH
3CH
4CH
© 2005 Directed Electronics, all rights reserved
-
4CH