Adjusting Intelli-Q; Adjusting Intelli-Bass - Orion HP-2800 Owner's Manual

Power amplifier
Table of Contents

Advertisement

WARNING!
Exercise caution when setting INTELLi-Q. Maximum boost can potentially
cause woofer damage due to over-excursion.

Adjusting Intelli-Q

Incorporated in the high-pass crossover, Intelli-Q maximizes the performance of a sub-
woofer. The high-pass subsonic filter removes unwanted bass output from the woofer,
increasing the output of a subwoofer by as much as 3 dB due to the increased mechanical
power handling. Depending on the enclosure, using Intelli-Q can increase the low frequen-
cy response by an additional 10dB! The type of enclosure used and the woofer's excursion
capability determine acceptable boost levels. Listed below are recommended boost levels
for different enclosure designs.

Adjusting Intelli-Bass

Intelli-Bass on the rear channels maximizes the performance of a subwoofer and allows for
continuous adjustment of low frequency boost on the rear channels. Intelli-Bass can be
adjusted from 0dB to 12dB of boost centered at 45Hz. Initially the Q is very low (wide). As
Intelli-Bass is added, the Q rises (narrows). This allows the amplifier to overcome acoustic
deficiencies in your vehicle. The type of enclosure used, the sub-woofer's excursion capabil-
ity, personal preference, and attitude determine acceptable boost levels.
WARNING!
Exercise caution when setting Intelli-Bass. Maximum boost can potentially
cause woofer damage due to overexcursion.
Enclosure Type
Infinite Baffle
Sealed
Vented
Sealed Band-pass
Vented Band-pass
Aperiodic
10
Boost Levels
0dB
+3dB
Tune above
High X-Max
Fs of woofer
Drivers--Tune
above Fs of
woofer
Tune above
Tune above
Fs of woofer
Fs of woofer
Tune to port
Tune to port
frequency
frequency
Tune above
Tune above
Fs of woofer
Fs of woofer
Tune to port
Tune to port
frequency
frequency
Set crossover
Set crossover
to Fs of
to Fs of
woofer
woofer
+6dB
+10dB
Not
Not
Recommended Recommended
High X-Max
Not
Drivers--Tune
Recommended
above Fs of
woofer
Tune to port
High X-Max
frequency
Drivers--Tune to
port frequency
High X-Max
Not
Drivers--Tune
Recommended
above Fs of
woofer
Tune to port
High X-Max
frequency
Drivers--Tune to
port frequency
Set crossover
Not
to Fs of
Recommended
woofer
© 2005 Directed Electronics, all rights reserved

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp-4800

Table of Contents