2
1
1. Coolant drain bolt
2. Gasket
4. Remove the radiator cap.
8
1
1. Radiator cap
1
8-19
5. Remove the coolant reservoir cap.
6. Disconnect the coolant reservoir hose on the
coolant reservoir side, and then drain the cool-
ant from the coolant reservoir.
1. Coolant reservoir cap
2. Coolant reservoir hose
7. After draining the coolant, thoroughly flush the
cooling system with clean tap water.
8. Install the coolant drain bolt and its new gas-
ket, and then tighten the bolt to the specified
torque.
Tightening torque:
Coolant drain bolt:
11 Nm (1.1 m·kgf, 8.0 ft·lbf)
1
2