Checking The Piston Pin; Installing The Piston And Cylinder - Yamaha YZ450F(E) 2014 Owner's Service Manual

Piston ring end gap
Top ring
End gap (installed)
0.20–0.30 mm (0.0079–0.0118 in)
Limit
0.55 mm (0.0217 in)
End gap (installed)
0.35–0.50 mm (0.0138–0.0197 in)
Limit
0.85 mm (0.0335 in)
Oil ring
End gap (installed)
0.20–0.50 mm (0.0079–0.0197 in)
EAS1SL1230

CHECKING THE PISTON PIN

1. Check:
• Piston pin
Blue discoloration/grooves  Replace the
piston pin and then check the lubrication
system.
2. Measure:
• Piston pin outside diameter "a"
Out of specification  Replace the piston
pin.
Piston pin outside diameter
17.991–18.000 mm (0.7083–
0.7087 in)
Limit
17.971 mm (0.7075 in)
3. Measure:
• Piston pin bore inside diameter "b"
Out of specification  Replace the piston.
Piston pin bore inside diameter
18.004–18.015 mm (0.7088–
0.7093 in)
Limit
18.045 mm (0.7104 in)
CYLINDER AND PISTON

INSTALLING THE PISTON AND CYLINDER

EAS1SL1231
1. Install:
• Oil ring expander "1"
• Lower oil ring rail "2"
• Upper oil ring rail "3"
• 2nd ring "4"
• Top ring "5"
TIP
Be sure to install the piston rings so that the
manufacturer's marks or numbers face up.
2. Install:
• Piston "1"
• Piston pin "2"
• Piston pin clip "3"
TIP
• Apply the engine oil to the piston pin.
• Install the piston with the F mark "a" on it
pointing to its intake (front) side.
• Before installing the piston pin clip, cover the
crankcase opening with a cloth to prevent the
clip from falling into the crankcase.
5-35
b
New