Removing The Rear Brake Caliper; Disassembling The Rear Brake Caliper; Checking The Rear Brake Caliper; Assembling The Rear Brake Caliper - Yamaha YZ450F(E) 2014 Owner's Service Manual

Table of Contents

Advertisement

REMOVING THE REAR BRAKE CALIPER

TIP
Before disassembling the brake caliper, drain
the brake fluid from the entire brake system.
1. Remove:
• Union bolt
• Copper washers
• Brake hose
TIP
Put the end of the brake hose into a container
and pump out the brake fluid.
DISASSEMBLING THE REAR BRAKE CALI-
EAS1SL1152
PER
1. Remove:
• Brake caliper piston "1"
• Brake caliper piston dust seal "2"
• Brake caliper piston seal "3"
1
2
3
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Blow compressed air into the brake hose
joint opening to force out the piston from the
brake caliper.
EWA13550
WARNING
• Cover the brake caliper piston with a cloth.
Be careful not to get injured when the pis-
ton is expelled from the brake caliper.
• Do not use a screwdriver etc. for removing
the brake caliper piston.
b. Remove the brake caliper piston dust seal
and the brake caliper piston seal.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲

CHECKING THE REAR BRAKE CALIPER

EAS1SL1153
1. Check:
• Brake caliper piston "1"
Rust/scratches/wear  Replace the brake
caliper piston.
• Brake caliper cylinder "2"
Scratches/wear  Replace the brake cali-
per assembly.
• Brake caliper body "3"
Cracks/damage  Replace the brake cali-
per assembly.
• Brake fluid delivery passages
(brake caliper body)
Obstruction  Blow out with compressed
air.
3
EWA13610
WARNING
When the brake caliper is disassembled, re-
place the brake caliper piston seal and the
brake caliper piston dust seal with new
ones.
2. Check:
• Brake caliper bracket
Crack/damage  Replace.

ASSEMBLING THE REAR BRAKE CALIPER

EAS1SL1154
EWA13620
WARNING
• Before installation, clean and lubricate the
internal parts. Use new brake fluid for
cleaning and lubricating.
• Never use solvents on internal brake com-
ponents as they will cause the piston seals
to swell and distort.
• When the brake caliper is disassembled,
replace the brake caliper piston seal and
the brake caliper piston dust seal with new
ones.
Recommended brake fluid
DOT 4
EAS1SL1155
4-26
REAR BRAKE
2
1

Advertisement

Table of Contents
loading

Table of Contents