Yamaha XVS1300CU Owner's Manual page 70

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the screws.
6
1
1. Screw
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1
1. Headlight bulb cover
2. Headlight coupler
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
2. Headlight bulb
6-31
4. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
2
5. Install the bulb cover, and then
connect the coupler.
TIP
When installing the headlight bulb cov-
er, make sure the "TOP" mark faces
upwards.
1
1. "TOP" mark
6. Install the headlight unit by install-
2
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
TOP