Checking The Front And Rear Brake Pads - Yamaha MAJESTY YP250 Owner's Manual

Checking the front and rear
brake pads
The front and rear brake pads must
be checked for wear at the intervals
specified in the periodic maintenance
and lubrication chart.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU00721
FRONT
Front and rear brake pads, checking
1
1. Brake caliper bolt
2. Brake caliper
Front brake pads
Each front brake pad is provided with
a wear indicator groove, which allows
you to check the brake pad wear
without having to disassemble the
brake. Check the brake pad wear as
follows.
1. Remove the brake caliper bolt,
and then tilt the caliper forward
to inspect the wear indicator
groove. If a brake pad has worn
to the point that the wear indica-
tor groove has almost disap-
peared, have a Yamaha dealer
replace the brake pads as a set.
2
1. Wear indicator groove
EAU04583
6-28
1
2. Install the brake caliper bolt, and
then tighten it to the specified
torque.
Tightening torque:
Brake caliper bolt:
26.5 Nm (2.65 m·kgf)
6