Replacing A Rear Turn Signal Light Bulb; Replacing A Tail/Brake Light Bulb - Yamaha MAJESTY YP250 Owner's Manual

Replacing a rear turn signal
light bulb
1. Place the scooter on the center-
stand.
2. Remove cowling C. (See page
6-10 for cowling removal and
installation procedures.)
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU03618
Turn signal light bulb (rear), replacing
1. Socket
3. Remove the socket (together
with the bulb) by turning it coun-
terclockwise.
4. Remove the defective bulb by
pulling it out.
5. Insert a new bulb into the socket.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the cowling.
Replacing a tail/brake light
bulb
1
6-40
1. Place the scooter on the center-
stand.
2. Remove cowling C. (See page
6-10 for cowling removal and
installation procedures.)
EAU03619
Tail/brake light bulb, replacing
6