Sidestand - Yamaha MAJESTY YP250 Owner's Manual

NOTE:
8 Align the appropriate notch in the
adjusting ring with the position
indicator on the shock absorber.
8 Use the spring preload adjusting
tool included in the owner's tool
kit to make this adjustment.
Minimum (soft)
Standard
Maximum (hard)
INSTRUMENT AND CONTROL FUNCTIONS
1. Sidestand switch
Setting
1

Sidestand

4
The sidestand is located on the left
7
side of the frame. Raise the side-
stand or lower it with your foot while
holding the scooter upright.
NOTE:
The built-in sidestand switch is part of
the ignition circuit cut-off system,
which cuts the ignition in certain situ-
ations. (See further down for an
explanation of the ignition circuit cut-
off system.)
1
EAU00330
Sidestand
3-20
w
The scooter must not be ridden
with the sidestand down, or if the
sidestand cannot be
moved up (or does not stay up),
otherwise the sidestand could con-
tact the ground and distract the
operator, resulting in a possible
loss of control. Yamaha's ignition
circuit cut-off system has been
designed to assist the operator in
fulfilling the responsibility of rais-
ing the sidestand before starting
off. Therefore, check this system
regularly as described below and
have a Yamaha dealer repair it if it
does not function properly.
EW000044
properly
3