Adjusting The Brake Pedal Free Play And Checking The Brake Pedal Position - Yamaha GRIZZLY 700 FI YFM7FGPW Owner's Manual

Hide thumbs Also See for GRIZZLY 700 FI YFM7FGPW:
Table of Contents

Advertisement

Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
EBU27780
Adjusting the brake pedal free play and
checking the brake pedal position
The brake pedal free play must be adjusted and
brake pedal position must be checked and, if nec-
essary, adjusted at the intervals specified in the
periodic maintenance and lubrication chart.
NOTE:
G
Always perform this maintenance completely in
the following order whenever adjusting the rear
brake.
8
G
Before adjusting the brake pedal free play and
checking the brake pedal position, check the
rear brake pads for wear.
Adjusting the brake pedal free play
The brake pedal free play should measure 0.0–5.0
mm (0.00–0.20 in) as shown. If the free play is in-
correct, adjust it as follows.
1. Brake pedal free play
1. Remove panel H. (See page 8-8.)
2. Loosen the locknut.
3. Turn the brake pedal free play adjusting nut in
direction (a) to increase the free play, and in
direction (b) to decrease it.
8-49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents