Yamaha diversion F Owner's Manual page 57

Periodic maintenance and adjustment
2 1
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 5–7 if the oil filter cartridge
is not being replaced.
5. Remove the oil filter cartridge with
an oil filter wrench.
1. Oil filter cartridge
2. Oil filter wrench
TIP
An oil filter wrench is available at a
Yamaha dealer.
6. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
1. O-ring
TIP
Make sure that the O-ring is properly
seated.
7. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1
2
1. Torque wrench
Tightening torque:
Oil filter cartridge:
8. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
6-12
17 Nm (1.7 m·kgf, 12 ft·lbf)
43 Nm (4.3 m·kgf, 31 ft·lbf)
6
1