CSB200 Class B AIS
Output Power:
33dBm ± 1.5 dB
Channel Bandwidth:
25kHz
Modulation Modes:
25kHz GMSK (AIS, TX and RX)
25kHz AFSK (DSC, RX only)
Bit rate:
9600 b/s ± 50 ppm (GMSK)
1200 b/s ± 30 ppm (FSK)
VHF Receiver:
Sensitivity - 107dBm 25kHz (Message Error Rate 20%)
Co-Channel 10dB
Adjacent Channel 70dB
IMD 65dB
Blocking 84dB
Environmental
IEC 60945
Operating Temperature: -25ºC to +55ºC
Indicators
On, TX, RX, Status, TX timeout, Error, TX Off
R2.0
43
www.busse-yachtshop.de | info@busse-yachtshop.de
CSB200 Class B AIS
Standards
This product complies with all the necessary standards under the
European R&TTE directive for Article 3.1(a), 3.1(b), 3.2 and 3.3(e). The
following standards have been followed in pursuance of this:
IEC62287-1: 2006-03 Maritime navigation and radio communication
equipment and systems – Class B ship borne equipment of the automatic
identification system (AIS) – Part 1: Carrier-sense time division multiple
access (CSTDMA) techniques
IEC60945: 2002-08 Maritime navigation and radio communication
equipment and systems – General requirements – Methods of testing and
required test results
IEC61162-1: Maritime navigation and radio communication equipment
and systems – Digital interfaces – Part 1: Single talker and multiple
listeners
IEC61108-1: GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) –
Part 1: Global positioning system (GPS) -Receiver equipment -
Performance standards, methods of testing and required test results
EN 301 843-1 v2.1: Electromagnetic compatibility and Radio spectrum
Matters (ERM); Electromagnetic Compatibility (EMC) standard for marine
radio equipment and services; Part 1: Common technical requirements
EN 50383: 2002 Basic standard for calculation and measurement of
electromagnetic field strength and SAR related to human exposure from
radio
base
stations
and
fixed
terminal
telecommunications system (110MHz – 40GHz)
EN60950-1:2002 Information technology equipment – Safety – Part 1:
General requirements
R2.0
44
stations
for
wireless
Need help?
Do you have a question about the CSB200 and is the answer not in the manual?