Serial Data; Other Vessels - Comar Systems CSB200 Installation And Instruction Manual

CSB200 Class B AIS

Serial Data

This tab shows the raw NMEA 0183 serial data being output by the AIS.
A typical display is shown below:
•
Serial data can be logged to a file by clicking the 'Log to file'
button and entering a file name and location in the dialog box.
o Logging to file will continue if other tabs are selected
after logging has been started
o Logging to file will cease when the 'Stop logging' button
is clicked
•
The serial data display can be paused by clicking the pause
button at the bottom right hand side of the data window. Clicking
the button a second time will resume output of the live serial
data.
•
Transmitted AIVDO messages are indented for easy
R2.0 23
www.busse-yachtshop.de | info@busse-yachtshop.de
CSB200 Class B AIS
identification
•
NMEA command sentences can be sent to the unit by entering
them in the lower text box and clicking the 'Send' button. proAIS
will calculate and append the NMEA checksum to the sentence
if the "Add Checksum" check box is checked. In this case enter
a NMEA sentence without including the asterisk that precedes
the checksum.

Other Vessels

This tab shows information received from other AIS equipped vessels in
the area.
•
The MMSI of each vessel is shown.
o Vessels equipped with Class A AIS have the MMSI
displayed in black text.
o Vessels equipped with Class B AIS have the MMSI
diplayed in blue text
•
The name and call sign of each vessel is shown
R2.0 24