Mechanism; W Iper M Echanism - Sanitron S17A Owner's Manual

Q S C
UARTZ LEEVE
Step 1 - Lift wiper clip up
Routine cleaning of the quartz sleeve is easily accomplished, using the dual action wiper mechanism.
1. Lift wiper clip up and away from wiper rod.
2. Grasp wiper knob and gently pull out, away, from the purifi er until it reaches its stop.
3. Push wiper back in, toward the purifi er until it reaches its second stop.
4. Repeat steps 2 and 3 as necessary.
5. Holding wiper in place, return wiper clip and snap over wiper rod, in front of the wiper lock spacer.
10
W
LEANING USING IPER
Figure 4 - Quartz Sleeve Cleaning
Step 2 - Gently pull wiper knob out
M
ECHANISM
Step 3 - Push wiper back in