Connectors And Terminals - Toshiba TD-E432 User Manual

14
Chapter 1
Introduction

Connectors and Terminals

For details about using cable types and connections, see pages 27-29.
1
1
ANTI-THEFT LOCK—Used to attach a commercially available antitheft device.
2
AC IN (3-pin, with earth terminal)—Connects with the supplied power cord.
mains supply connection.
3
LAN (RJ45 ETHERNET)—Connects with an Ethernet cable for LAN access.
4
RS-232C OUT—Connects with the RS-232C IN connector of other connected TD-E432/TD-E502/TD-E552/TD-
E652.
5
RS-232C IN—Connects with the RS-232C OUT connector of a computer or other connected TD-E432/TD-E502/
TD-E552/TD-E652.
6
DVI-D OUT—Outputs the signal that is supplied to the DVI-D IN connector (7).
7
DVI-D IN—Connects with the digital video output of a computer, etc.
8
REMOTE CONTROL SENSOR AND POWER INDICATOR— Remote control sensor: Receives the signal
from the infrared remote control. Power indicator: Indicates the state of the LCD display. For details, see page 36.
9
IR IN—Connects with the IR output of an IR control.
10
IR OUT—Outputs the signal that is supplied to the IR IN connector (9).
11
ANALOG VIDEO—Use the supplied cable in the package to connect with the video output connector of external
equipment such as a computer, VCR, and DVD player., etc. This connector supports component video (YPbPr)
and analog video (AV) input.
Back
Underside
2 3 4 5 6
Left side
8
7
Class I Product requires an earthed
9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17