Setup Menu Screen - Toshiba TD-E432 User Manual

Setup Menu Screen

Scheduler
Signal Check Priority
Control Setting
Standby Mode
Ethernet Setting
Sleep Timer
Power Save
Setup Menu Screen
Change schedule settings.
• Set signal priority 1-5 (priority 1 is the highest). If the current
source signal is lost, the display will search for a new signal
source according signal priority setting).
• If signal priority check is enabled, upon power on the display will
search for an active source according the signal priority check
settings.
• If there is no signal source available in priority 1, the display will
check other sources in descending order of priority, and switch
source accordingly.
• If the signal source with the highest priority returns, the display
will automatically switch back to this source.
• If signal priority check is disabled, upon power on the display will
use will the last used source.
• If signal priority check is enabled and upon power on the source
is USB, the system will automatically play from USB.
Choose to control the LCD display through RS-232C or LAN.
Select standby mode; ECO or normal.
Change ethernet settings for control via LAN.
Change sleep timing settings, or turn off the sleep timer.
Change power save settings, or turn off the power save mode.
How to use the LCD Display Monitor
65
Chapter 3