Options Settings Menu; Setting The Allocation Of The Audio Connectors - Toshiba 42HP82 Service Manual

Options Settings Menu

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting "AUDIO 1" to "VIDEO 2"
Press the PROCEED button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select "OPTIONS", then
press the PROCEED button.
The "OPTIONS" screen appears.
2. Use the and buttons to select "AUDIO 1".
O P T I O N S
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
SEL. ADJ.
3. To set the AUDIO1 to "VIDEO2"...
Use the and buttons to select "VIDEO2".
The mode switches as follows each time the
button is pressed:
The available sources depend on the setting of "BNC
SELECT".
→
VIDEO1 ↔ VIDEO2 ↔ HD/DVD/DTV
RGB:
→
RGB/PC3 ↔RGB/PC2 ↔RGB/PC1
→
VIDEO1 ↔ VIDEO2 ↔ HD1/DVD1/DTV1
COMP.:
→
RGB/PC3 ↔RGB/PC1 ↔HD2/DVD2/DTV2
→
VIDEO1 ↔ VIDEO2 ↔ VIDEO3
VIDEO:
→
RGB/PC3 ↔RGB/PC1 ↔HD/DVD/DTV
O P T I O N S
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
SEL. ADJ.
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
: VIDEO1
: HD/DVD1
: RGB1
: RGB
: AUTO
: 1080B
EXIT RETURN
or
←
←
←
←
←
: VIDEO2
: HD/DVD1
: RGB1
: RGB
: AUTO
: 1080B
EXIT RETURN
Information
AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
Restoring the factory default settings
Select "RESET" under the function menu. Note that
this also restores other settings to the factory defaults.
←
33