Yamaha VERSITY VP300 Owner's Manual page 54

PERIODIC MAINTENANCE AND MINOR REPAIR
ZAUM0584
1. Panel E
6
1
1
2
3
ZAUM0427
1. Cowling A
2. Screw (x 8)
3. Floorboard mat (x2)
Cowling A
To remove the cowling
1. Pull up the floorboard mat on each
side of the scooter.
2. Remove panel A. (See page 6-9
for removal and installation
procedures.)
3. Remove the cowling screws.
ZAUM0428
1. Turn signal lead coupler
2. Headlight coupler
EAUM0105*
4. Disconnect the headlight coupler
5. Pull the cowling off.
To install the cowling
1. Connect the headlight coupler,
2. Place the cowling in the original
3. Install panel A.
4. Place the floorboard mats in their
6-7
2
1
and the turn signal lead coupler.
and the turn signal lead coupler.
position, and then install the
screws.
original position.