Installing A Wheel - Yamaha YFM250R-W Owner's Manual

Rear
1. Nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
8
5. Remove the wheel.
EBU27481

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
When installing the wheel, make sure its arrow
mark points toward the rotating direction of the
wheel.
1. Arrow mark
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
Tightening torques:
Front wheel nut:
45 Nm (4.5 m·kgf, 32 ft·lbf)
Rear wheel nut:
45 Nm (4.5 m·kgf, 32 ft·lbf)
8-42