Headlight Beam; Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha YFM250R-W Owner's Manual

EBU28170

Headlight beam

If a headlight beam adjustment is necessary, have
a Yamaha dealer perform it.
EBU25600

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the lens by removing the screws.
8
1. Screw
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
1
1. Tail/brake light bulb
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
ECB00700
NOTICE
Do not overtighten the screws, otherwise the
lens may break.
EBU28030

Replacing a turn signal light bulb

1. Remove the turn signal light lens by removing
the screw.
8-40
1