Auxiliary Light Bulb; Removing A Wheel - Yamaha YFM250R-W Owner's Manual

1. Screw
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screw.
ECB00870
NOTICE
Do not overtighten the screw, otherwise the
lens may break.
EBU28020

Auxiliary light bulb

If the auxiliary light bulb burns out, have a Yamaha
dealer replace it.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
Front
1
1. Nut
8-41
1
8