To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt.
8
1. Negative battery lead (black)
2. Positive battery lead (red)
3. Install the battery holding plate by installing
the bolts, and then hook the band to secure
the owner's tool kit.
4. Install the seat. (See page 4-14.)
2
1
EBUM0180
Replacing the fuse
The fuse holder is located beside the battery and
can be accessed as follows:
1. Remove the seat. (See page 4-14.)
2. Unhook the band securing the owner's tool kit,
and then remove the battery holding plate by
removing the bolts.
1
1. Battery band
2. Bolt
3. Battery holding plate
8-38
3
2