Crossing A Slope - Yamaha YFM250R-W Owner's Manual

Whenever possible, ride your ATV straight down-
hill. Avoid sharp angles which could allow the ATV
to tip or roll over. Carefully choose your path and
ride no faster than you will be able to react to ob-
stacles which may appear.
EWB01620
WARNING
Always follow proper procedures for going
down hills as described in this Owner's Manu-
al.
Note: a special technique is required when
braking as you go down a hill.
G
Always check the terrain carefully before
you start down any hill.
7
G Shift your weight backward.
G Never go down a hill at high speed.
G
Avoid going down a hill at an angle that
would cause the ATV to lean sharply to one
side. Go straight down the hill where possi-
ble.

CROSSING A SLOPE

Traversing a sloping surface on your ATV requires
you to properly position your weight to maintain
proper balance. Be sure that you have learned the
basic riding skills on flat ground before attempting
to cross a sloping surface. Avoid slopes with slip-
pery surfaces or rough terrain that may upset your
balance.
7-18