Checking The Brake And Clutch Fluid Levels - Yamaha MT-01 Owner's Manual

Hide thumbs Also See for MT-01:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND MINOR REPAIR
Checking the brake and clutch
fluid levels
Front brake
1. Minimum level mark
6
Rear brake
1. Minimum level mark
EAU36730
Clutch
1. Minimum level mark
Insufficient brake or clutch fluid may al-
low air to enter the brake or clutch sys-
tems, possibly causing them to become
ineffective.
NOTE:
The rear brake fluid reservoir is located
under the seat. (See page 3-14.)
Before riding, check that the brake and
clutch fluids are above the minimum
level marks and replenish if necessary.
A low brake or clutch fluid level may in-
dicate brake or clutch system leakage
and/or worn brake pads. If the brake or
clutch levels are low, be sure to check
the brake or clutch systems for leakage
and the brake pads for wear.
6-16
Observe these precautions:
G
When checking the brake and
clutch fluid levels, make sure that
the top of each reservoir is level.
G
Use only the recommended quality
brake fluid, otherwise the rubber
seals may deteriorate, causing
leakage and poor braking or clutch
performance.
Recommended brake and clutch flu-
id:
DOT 4 brake fluid
G
Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and
lead to poor braking or clutch per-
formance.
G
Be careful that water does not en-
ter the brake or clutch fluid reser-
voir when refilling. Water will
significantly lower the boiling point
of the fluid and may result in vapor
lock.
G
Brake fluid may deteriorate paint-
ed surfaces or plastic parts. Al-
ways
clean
up
spilled
immediately.
fluid

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents