Yamaha MT-01 Owner's Manual page 69

b. Disconnect the headlight cou-
pler, and then unhook the
headlight bulb holder.
1. Headlight coupler
2. Headlight bulb holder
c. Remove the defective bulb.
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
d. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
Take care not to damage the follow-
ing parts:
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
EWA10790
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
ECA10650
1. Do not touch the glass part of the bulb.
6-27
e. Connect the coupler, and then
install the headlight bulb holder
cover by turning it clockwise.
To replace the low beam headlight
bulb
a. Disconnect the headlight cou-
pler, and then remove the de-
fective bulb by turning
counterclockwise.
6
it