Yamaha MT-01 Owner's Manual page 73

1. Bolt
NOTE:
Skip steps 2 and 7 if the auxiliary light
bulb A is being replaced.
2. To replace auxiliary light bulb B or
C, remove the corresponding
headlight unit side cover bracket
and the headlight unit side cover
by removing the screws.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Screw
2. Headlight unit side cover bracket
3. Headlight unit side cover
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Auxiliary light bulb socket
4. Remove the defective bulb by pull-
ing it out.
6-31
1. Auxiliary light bulb
5. Insert a new bulb into the socket.
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the headlight unit side cover
and the headlight unit side cover
bracket by installing the screws.
8. Install the headlight unit by install-
ing the bolts.
6