1. Screw
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
1. Tail/brake light bulb
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
ECB00700
CAUTION:
Do not overtighten the screws, otherwise the
lens may break.
EBU25650
Removing a wheel
1. Loosen the wheel nuts.
1. Wheel nut
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
8-40
8