V-Belt Cooling Duct Check Hose - Yamaha WOLVERINE 350 YFM25XX Owner's Manual

3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
1. Tailpipe
8
2. Spark arrester
4. Insert the tailpipe into the muffler and align the
bolt holes.
5. Install the tailpipe cover by installing the bolts,
and then tighten them to the specified torque.
Tightening torque:
Tailpipe bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
EWB02340
WARNING
Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a fire.
Always let the exhaust system cool prior to
touching exhaust components.
EBU23920

V-belt cooling duct check hose

If dust or water collects in the V-belt cooling duct
check hose, remove the hose and clean it.
1. V-belt cooling duct check hose (left front side of ATV)
8-21