Axle Boots; Brake Light Switches - Yamaha WOLVERINE 350 YFM25XX Owner's Manual

1 1
1. Distance between brake pedal and footboard bracket
EWB02080
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability,
8
which could lead to an accident.
After servicing:
G
Make sure the brakes operate smoothly and
that the free play is correct.
G Make sure the brakes do not drag.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
EBU24230

Axle boots

The axle boots must be checked for damage at the
intervals specified in the periodic maintenance and
lubrication chart. Check the axle boots for tears or
damage. If any damage is found, have them re-
placed by a Yamaha dealer.
EBU24751

Brake light switches

The operation of the brake light switches must be
checked and, if necessary, adjusted at the inter-
vals specified in the periodic maintenance and lu-
brication chart.
The brake light switch for the brake pedal can be
adjusted as follows, but the other brake light
switches should be adjusted by a Yamaha dealer.
1. Remove panel A. (See page 8-8.)
NOTE:
The brake light switch is properly adjusted when
the brake light comes on just before braking takes
effect.
8-31