Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb - Yamaha WOLVERINE 350 YFM25XX Owner's Manual

6. Install the headlight bulb holder cover at the
rear of the headlight.
ECB00670
CAUTION:
8
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
7. Adjust the headlight beam if necessary.
EBU25560

Adjusting a headlight beam

ECB00690
CAUTION:
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the adjusting bolt
in direction (a).
To lower a headlight beam, turn the adjusting bolt
in direction (b).
1. Headlight beam adjusting bolt
EBU25600

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the lens by removing the screws.
8-39