Brake Light Switches; Adjusting The Clutch Lever Free Play - Yamaha YFM250R Owner's Manual

EBU24740

Brake light switches

The operation of the brake light switches must be
1
checked and, if necessary, adjusted at the inter-
2
vals specified in the periodic maintenance and lu-
brication chart.
3
The brake light switch for the brake pedal can be
adjusted as follows, but the other brake light
4
switches should be adjusted by a Yamaha dealer.
5
NOTE:
The brake light switch is properly adjusted when
6
the brake light comes on just before braking takes
effect.
7
Turn the adjusting nut while holding the brake light
switch in place. To make the brake light come on
8
earlier, turn the adjusting nut in direction (a). To
9 make the brake light come on later, turn the adjust-
ing nut in direction (b).
10
11
(a)
1. Brake light switch
2. Brake light switch adjusting nut
EBU24810

Adjusting the clutch lever free play

The clutch lever free play must be checked and, if
necessary, adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
The clutch lever free play should measure 5.0–
10.0 mm (0.20–0.39 in) as shown. If the free play
is incorrect, adjust it as follows.
8-29
1
2
(b)