Clutch Lever - Yamaha YFM250R Owner's Manual

3
1
2
3
4
5
6
1. Locknut
2. Adjusting screw
7
3. No more than 12 mm (0.47 in)
8
3. Tighten the locknut.
EWB00240
9 WARNING
Improper adjustment of the speed limiter and
10
throttle could cause throttle cable damage or
improper throttle operation. You could lose
11
control, have an accident or be injured. Do not
turn the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
aged. Always make sure the throttle lever free
play is adjusted to 2.0–4.0 mm (0.08–0.16 in).
1
2
(b)
(a)
4-4
(See page 8-20.)
EBU18382

Clutch lever

The clutch lever is located on the left handlebar
and the ignition circuit cut-off system is incorporat-
ed in the clutch lever holder. To disengage the
clutch, pull the clutch lever toward the handlebar
grip. To engage the clutch, release the clutch lever.
The clutch lever should be pulled rapidly and re-
leased slowly for smooth clutch operation. (See
page 6-1 for a description of the ignition circuit cut-
off system.)
1. Clutch lever