with oil.)
e. Remove the spark plug cap from the spark
1
plug, and then install the spark plug and
the spark plug cap.
2
6. Lubricate all control cables and the pivoting
points of all levers and pedals.
3
7. Check and, if necessary, correct the tire air
pressure, and then block up the ATV so that
4
all of its wheels are off the ground. Alternative-
ly, turn the wheels a little every month in order
5
to prevent the tires from becoming degraded
in one spot.
6
8. Cover the muffler outlet with a plastic bag to
prevent moisture from entering it.
7
9. Remove the battery and fully charge it. Store
it in a cool, dry place and charge it once a
8
month. Do not store the battery in an exces-
9
sively cold or warm place [less than 0 °C (30
°F) or more than 30 °C (90 °F)]. For more in-
10
formation on storing the battery, see page
8-36.
11
NOTE:
Make any necessary repairs before storing the
ATV.
9-3