Yamaha YFM250R Owner's Manual page 82

1
2
3
2
4
5
6
1. Oil filter element
2. O-ring
7
8. Install the oil filter element and O-ring.
8
NOTE:
Make sure that the O-ring is properly seated.
9
9. Install the oil filter element cover by installing
10
the bolts, and then tighten them to the speci-
fied torque.
11
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
2
10. Install the engine oil drain bolt and tighten it to
the specified torque.
1
ECB00320
CAUTION:
Before installing the engine oil drain bolt, be
sure to install the O-ring, compression spring
and oil strainer.
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m·kgf, 14.5 ft·lbf)
11. Add the specified amount of the recommend-
ed engine oil, and then install and tighten the
engine oil filler cap.
Recommended oil:
See page 10-1.
Oil quantity:
Without oil filter element replacement:
1.25 L (1.32 US qt) (1.10 Imp.qt)
With oil filter element replacement:
1.35 L (1.43 US qt) (1.19 Imp.qt)
NOTE:
Be sure to wipe off spilled oil on any parts after the
8-13